Teltonika FMB120 GNSS Tracker

[zapp_brannigan]

Earlier I had shared FMB920 which is ideal for taxi and personal use .I also have FMB120 ideal for commercial vehicles i.e trucks .This is due to additional inputs that can be used to integrate more sensors for instance Temperature and Humidity sensor, Headset, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support.

Ksh 8,000 device only .
Installation and hosting services also available at an extra cost .

Scheme

 

[It's Me Scumbag]

Inaweza wekwa kwa tuktuk?

 

[X-TRAIL]

Earlier I had shared FMB920 which is ideal for taxi and personal use .I also have FMB120 ideal for commercial vehicles i.e trucks .This is due to additional inputs that can be used to integrate more sensors for instance Temperature and Humidity sensor, Headset, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support.

Ksh 8,000 device only .
Installation and hosting services also available at an extra cost .

View attachment 3650

Scheme

View attachment 3652

Can it switch more than three outputs and does it measure fuel and also inputs ziko ngapi

 

[zapp_brannigan]

Inaweza wekwa kwa tuktuk?

Yes

 

[zapp_brannigan]

Can it switch more than three outputs and does it measure fuel and also inputs ziko ngapi

This is limited to 2 outputs , what exactly do you intend to achieve with 3 outputs . I can get you a solution that meets your needs .
There are 5 inputs (3 digital and 2 analog) .
Ideally digital input 1 goes to ignition to help immobilise the ignition when required and also the device uses this log trip distance. Analog input 1 would monitor fuel consumption but through a manual calibration that requires the tank to be empty and then it's filled in increments of 10% and some voltage changes are recorded.
There is also an option of monitoring fuel using CAN bus system /OBD II but not compatible with all vehicles .This is an accessory .

 

[X-TRAIL]

This is limited to 2 outputs , what exactly do you intend to achieve with 3 outputs . I can get you a solution that meets your needs .
There are 5 inputs (3 digital and 2 analog) .
Ideally digital input 1 goes to ignition to help immobilise the ignition when required and also the device uses this log trip distance. Analog input 1 would monitor fuel consumption but through a manual calibration that requires the tank to be empty and then it's filled in increments of 10% and some voltage changes are recorded.
There is also an option of monitoring fuel using CAN bus system /OBD II but not compatible with all vehicles .This is an accessory .

I need to do some stunts that is if you know you know

 

[zapp_brannigan]

I need to do some stunts that is if you know you know

I have some devices with more inputs .FM4200 and FM1100 .
Teltonika FM4200 has 8 inputs (4 digital inputs and 4 analog inputs ).

Then there is FM1100 - 4 inputs (3 digital inputs + 1 analog input)

 

[Angote]

What are your contacts?

 

[zapp_brannigan]

What are your contacts?

Got even a better deal for you lvcan 200 at 7k